SUMAVISION EMR Operation Introduction
11 /53
system or fixed extinguishing system.
Power supply requirements:
The devices, air-conditioning system and lighting system should have their own power
system respectively.
3.3.3 Power supply Requirement
Parameters for normal operation of EMR are shown as follows:
Power supply:
Voltage: 100V-240V AC;
Power frequency: 50Hz-60Hz
Power consumption:: < 100W
Nominal fuse: 2A
Grounding: the device should be well grounded through the ground
terminal.
3.4 Storage
Requirement:
Humidity: ≤95% (20℃) ；
Temperature: -20℃～60℃
Don’t store with corrosive liquids and gases.
Don’t place the device nearby strong electromagnetic fields.
Prohibit infection by radioactive substances.
3.5 Transport
EMR is packaged by using the special packaging of Sumavision. In case of intact
packaging, such transportation modes like highway, railway, airline and shipping are
acceptable. In case of damaged packaging, the device should be transported after being
packaged by professional electronic product transportation companies.
During the transportation, the device should be handled gently to avoid throwing, falling or
severe collision, and kept the labeling on the package upward.
To Next Page
Loading...
Need help?
General