SUMAVISION EMR Operation Introduction
22 /53
RF output: Insert a 6-adjacent-channel QAM modulation card (Refer to
6-adjacent-channel QAM modulation card) into the platform to provide RF output
for the platform.
5.2 Board Card Description
This section will introduce the board cards applied in EMR to help users understand the
version information, status information and parameter settings of each kind of board card.
5.2.1 Main Gigabit Card
The main Gigabit card is provided by the EMR itself and is different from other board cards
because the main Gigabit card occupies any card slot but is integrated with the EMR. The
interface card has four Ethernet ports, from left to right, they are Gigabit input/output port 1,
Gigabit input/output port 2, Gigabit input/output port 3 and Gigabit input/output port 4.
Gigabit input/output Ethernet port 1 and 2 are used for the output and input of IP stream,
while Gigabit input/output Ethernet port 3 and 4 are backup Ethernet port of the Gigabit
input/output Ethernet port 1 and 2, which requires Gigabit module to connect the Gigabit
line and the router for normal communication.
The parameter screen of the main Gigabit card is shown as follows:
To Next Page
Loading...
Need help?
General