8-4
8. Administrator mode｜Lock functions
8. Administrator mode
If you enable “Cycle” option, a startup
password is requested every certain
period of time (every day/every
week/every month/every time) after
the date when the startup password is
activated passed.
Security setting is enabled
Change a startup password
Change a date when the
splicer requires a password
entry.
You cannot start the splicer if you’ve forgot the startup password. It should
be taken notes of.
Please contact our maintenance service center if you’ve forgot it.
Cycle settin
Security Settin
s screen
To Next Page
Loading...
