8-5
8. Administrator mode｜Lock functions
8. Administrator mode
●
Lock the settings (all)
An administrator can lock various settings so an operator cannot edit them.
1: Open the Administrator settings
panel. Tap “Password Settings”.
2: Tap “Security Settings”.
3: Scroll down the page, and
then tap “Password Lock Set-
tings” to set it to ON.
4: In Operator mode, splice
program, heater program,
function settings and sound
setting cannot be edited.
If you would like to edit the
settings after you’ve locked
them, log in to Administrator
mode, and then set “Function
Lock Setting” to OFF.
You cannot start the splicer if
you’ve forgot the startup
password. It should be taken
notes of.
Please contact our maintenance
service center if you’ve forgot it.
To Next Page
Loading...
