2-6
2. Basic splicing operation｜Preparing power supply
2. Basic splicing operation
Press the battery check button. The LED will light up for a few seconds to indicate
the battery status in one of five levels.
The battery level is also displayed as a
battery level indicator on the monitor.
Splice and heat cycles possible with
remaining battery level is indicated when
you tap the indicator.
Tap
*The possible cycle displayed on the monitor is estimated based on the remaining
battery level. It changes according to the operational environment and condition.
(No guaranteed value)
・Check the battery level on the monitor
・Check the battery level on the battery pack
Battery check button
Status
Current battery level
0~5％ 6~20％ 21~40％ 41~60％ 61~80％ 81~100％
Discharging
Charging
Be sure to charge the battery before use if the battery level is low.
Battery
status
indication
81
〜
％
61
〜
80
％
41
〜
60
％
21
〜
40
％
1
〜
20
％
＊If no LEDs light up, the battery
level is zero.
■ Battery level check
To Next Page
Loading...
