Sun Microsystems BLIZZARD Qtech III User Manual

INSTRUCTIONS MANUAL
-106-
FIG. 21
3
MAX
MIN
5
FIG. 22
1
The oil must be added through the hole in which the oil cap was lodged by using a proper
funnel (ref 5, Fig.21).
Add oil a little at a time, waiting for the level to rise before each successive addition, until the oil
level is about ½ cm above the red mark on the indicator (ref 3, Fig.21).
Replace the filling cap (ref 1, Fig.22) and tighten down.

Sun Microsystems BLIZZARD Qtech III Specifications

General

Brand	Sun Microsystems
Model	BLIZZARD Qtech III
Category	Air Conditioner
Language	English