Sun Microsystems BLIZZARD Qtech III User Manual

INSTRUCTIONS MANUAL
-85-
EVAPORATOR PRESSURE
From CALIBRATION, select EVAPORATOR PRESSURE, the following screen is displayed:
Press OK, the following warning message is displayed:
ATTENTION: Automatic Evaporator Pressure calibration can be done only if A/C Pressure is
calibrated and with a minimum of 1 kg of gas inside the bottle.
Press OK to continue:
Make sure that HP and LP couplings are disconnected from A/C system or else, then press OK
to continue:
After few minutes the following message will be displayed:
R134a EVAPORATOR PRESSURE
Evaporator pressure
AUTOMATIC CALIBRATION
Press OK
A
utomatic Evaporato
r
calibration can be
done only after a PA/C calibration and
with a minimum of 1kg of gas inside the
bottle.
Press OK
R134a EVAPORATOR PRESSURE
R134a EVAPORATOR PRESSURE
Make sure that HP and LP
couplings are disconnected from
A
/C system o
r
else
Press OK to continue
R134a EVAPORATOR PRESSURE
Evaporator pressure
AUTOMATIC CALIBRATION
Calibration running
Please wait…
PEV AUTOMATIC CALIBRATION

Sun Microsystems BLIZZARD Qtech III Specifications

General

Brand	Sun Microsystems
Model	BLIZZARD Qtech III
Category	Air Conditioner
Language	English