Sun Microsystems BLIZZARD Qtech III User Manual

INSTRUCTIONS MANUAL
-81-
BOTTLE PRESSURE
From CALIBRATION, select BOTTLE PRESSURE, the following screen is displayed:
Press OK, the following warning message is displayed:
ATTENTION: Automatic Bottle Pressure calibration can be done only if A/C Pressure is
calibrated and with a minimum of 1 kg of gas inside the bottle.
Press OK to continue:
Close the red bottle valve (ref 7, Fig.17), then press OK:
Make sure that HP and LP couplings are disconnected from A/C system or else, then press OK
to continue:
A
utomatic BP calibration can be done
only after a PA/C calibration and with a
minimum of 1kg of gas inside the bottle.
Press OK
R134a BOTTLE PRESSURE
PB
AUTOMATIC CALIBRATION
Press OK
R134a BOTTLE PRESSURE
R134a BOTTLE PRESSURE
PB
AUTOMATIC CALIBRATION
Close the red bottle valve
Press OK
R134a BOTTLE PRESSURE
Make sure that HP and LP
couplings are disconnected from
A
/C system or else
Press OK to continue

Sun Microsystems BLIZZARD Qtech III Specifications

General

Brand	Sun Microsystems
Model	BLIZZARD Qtech III
Category	Air Conditioner
Language	English