INSTRUCTIONS MANUAL
-37-
At the end of this phase, the machine will test for leaks in the A/C system :
(WARNING! If vacuum time < 15 minutes this test is not reliable). If leaks are found, the
machine will stop automatically and display the A/C SYSTEM LEAKS alarm.
Detection of micro-leaks is not guaranteed.
Upon completion of the vacuum phase, new oil will be automatically reintegrated: the volume
will be equal to that of the used oil discharged or to the volume set by the operator.
the quantity of UV set by the operator will be automatically reintegrated.
When completed, the system will go on to charging with the preset quantity of refrigerant.
Then the following screen will be displayed:
R134a AUTOMATIC PROCEDURE
VACUUM
R134a AUTOMATIC PROCEDURE
VACUUM
UV Inj.
R134a AUTOMATIC PROCEDURE
UV INJECTION
Oil Injected
R134a AUTOMATIC PROCEDURE
OIL INJECTION
Recovered gas
Bottle Pressure
/C pressure
Bottle temperature
R134a AUTOMATIC PROCEDURE
GAS FILLING
x:xx
CHECK LEAKS
To Next Page
Loading...
Need help?
General