Intro(8)
4 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
setsnmpusm specify the SNMPv3 agent’s User-based Security Model
(USM) configuration
setsnmpvacm modify the SNMPv3 agent’s View-based Access Control
Model (VACM) configuration
setssh configure the settings for the Secure Shell (SSH) service
used in the XSCF network
setsunmc start or stop the Sun Management Center agent and make
changes to its configuration
settelnet start or stop the telnet service used in the XSCF network
settimezone set the time zone and Daylight Saving Time of XSCF
setupfru set up device hardware
setupplatform set up platform specific settings
showaltitude display the altitude of the system and whether the air filter
installed
showarchiving display log archiving configuration and status
showaudit display the current auditing system state
showautologout display the session timeout time of the XSCF shell
showboards display information on an eXtended System Board (XSB)
showcod display Capacity on Demand (COD) configuration
information
showcodlicense display the current Capacity on Demand (COD) right-to-
use (RTU) licenses stored in the COD license database
showcodusage display the current usage statistics for Capacity on Demand
(COD) resources
showconsolepath display information on the domain console that is currently
connected
showdate show the date and time of XSCF
showdateoffset display the time differences between the time of the system
and the time of the domains
showdcl display the current domain component list (DCL)
showdevices display current information on an eXtended System Board
(XSB)
showdomainmode display the domain mode
showdomainstatus display the current domain component list (DCL)
To Next Page
Loading...
Need help?
General
