Troubleshooting continued
Display Cause
Espresso/coffee Cups too cold
not hot enough
Espresso/coffee too weak.
Not enough pre-ground
coffee used
No milk froth or milk not
dispensed
Low quality froth.
Very loud noise during
grinding
Solution
Warm up cups with hot
water
Increase the coffee
temperature: see pg 25
Setting and storing the
coffee temperature
Measure coffee properly:
top up with 1 level
measuring spoon (max.8g)
of pre-ground coffee
Set ground coffee quantity
higher
Vary grinding fineness
Try a different coffee sort.
Milk system not correctly Check milk system
connected. connection: see section
pg 10 Connecting the
milk system
Milk tube bent Straighten milk tube
Milk container is empty Fill milk container
Milk too warm or old Use fresh, cold milk.
Froth nozzle is clogged. Clean froth nozzle: see pg
32 Cleaning the nozzle of
the milk frother
Milk system is not clean. Clean milk system: see pg
35 Milk system cleaning
program.
Grinding mechanism Contact our Customer
clogged by foreign matter Service Hotline to locate
your nearest service agent
representative on
1800 881 861
44
To Next Page
Loading...
