SunFounder PiCar-X Kit
6.20 Orienteering
This project uses the remote control function to guide the PiCar-X through a competitive scavenger hunt!
First, set up either an obstacle course, or a maze, or even an empty room that the PiCar-X can drive through. Then,
randomly place six markers along the route, and put a color-card at each of the six markers for the PiCar-X to find.
The six color models for PiCar-X are: red, orange, yellow, green, blue and purple, and are ready to print from a colored
printer from the PDF below.
• [PDF]Color Cards
Note: The printed colors may have a slightly different hue from the Ezblock color models due to printer toner differ-
ences, or the printed medium, such as a tan-colored paper. This can cause a less accurate color recognition.
The PiCar-X will be programmed to find three of the six colors in a random order, and will be using the TTS function
to announce which color to look for next.
The objective is to help the PiCar-X find each of the three colors in as short of a time as possible.
Place PiCar-X in the middle of the field and click the Button on the Remote Control page to start the game.
160 Chapter 6. Play with Ezblock
To Next Page
Loading...
