SunFounder PiCar-X Kit
PiCar-X has two programming languages: Blockly and Python. No matter what language you program in, you’ll find
detailed steps to teach you everything from configuring the Raspberry Pi to running the relevant example code.
• Play with Python
– This chapter is for those who enjoy programming in Python or want to learn the Python language.
– To get Picar-X working properly, you must install some libraries first.
– The Raspberry Pi configuration and samples code for the PiCar-X are provided in this chapter.
– An APP - SunFounder Controller is also provided to allow you to remotely control the PiCar-X on your
mobile device.
• Play with Ezblock
– In this section, you will use a Blockly based APP, Ezblock Studio, which, like Scratch, allows you to drag
and drop blocks to make Picar-X move.
– It is required to reinstall the SD card with the operating system we provide with pre-installed Ezblock
environment before programming. It is recommended to use a new or unused TF card for this section.
– Ezblock Studio is available for nearly all types of devices, including Macs, PCs, and Androids.
– Ezblock Studio is a good choice if you are 6-12 years old, or don’t have programming skills, or want to test
Picar-X quickly.
Content
Note: Hello, welcome to the SunFounder Raspberry Pi & Arduino & ESP32 Enthusiasts Community on Facebook!
Dive deeper into Raspberry Pi, Arduino, and ESP32 with fellow enthusiasts.
Why Join?
• Expert Support: Solve post-sale issues and technical challenges with help from our community and team.
• Learn & Share: Exchange tips and tutorials to enhance your skills.
• Exclusive Previews: Get early access to new product announcements and sneak peeks.
• Special Discounts: Enjoy exclusive discounts on our newest products.
• Festive Promotions and Giveaways: Take part in giveaways and holiday promotions.
Ready to explore and create with us? Click [] and join today!
2 CONTENTS
To Next Page
Loading...
