SunFounder PiCrawler Kit

To Next Page

To Previous Page

Step 2: Connect to Raspberry Pi

After a quick install open it up and now connect it to an FTP server. It has 3 ways to connect, here we use the Quick

Connect bar. Enter the hostname/IP, username, password and port (22), then click Quick Connect or press Enter

to connect to the server.

Note: Quick Connect is a good way to test your login information. If you want to create a permanent entry, you can

select File-> Copy Current Connection to Site Manager after a successful Quick Connect, enter the name and click

OK. Next time you will be able to connect by selecting the previously saved site inside File -> Site Manager.

Step 3: Upload/download ﬁles.

You can upload local ﬁles to Raspberry Pi by dragging and dropping them, or download the ﬁles inside Raspberry Pi

ﬁles locally.

132 Chapter 5. Appendix

SunFounder PiCrawler Kit - Page 136