SunFounder PiCrawler Kit
• Exclusive Previews: Get early access to new product announcements and sneak peeks.
• Special Discounts: Enjoy exclusive discounts on our newest products.
• Festive Promotions and Giveaways: Take part in giveaways and holiday promotions.
Ready to explore and create with us? Click [] and join today!
3.1.5 5. Install All the Modules (Important)
Make sure you are connected to the Internet and update your system:
sudo apt update
sudo apt upgrade
Note: Python3 related packages must be installed if you are installing the Lite version OS.
sudo apt install git python3-pip python3-setuptools python3-smbus
Install robot-hat module.
cd ~/
git clone -b v2.0 https://github.com/sunfounder/robot-hat.git
cd robot-hat
sudo python3 setup.py install
Then download the code and install vilib module.
cd ~/
git clone -b picamera2 https://github.com/sunfounder/vilib.git
cd vilib
sudo python3 install.py
Then download the code and install picrawler module.
cd ~/
git clone -b v2.0 https://github.com/sunfounder/picrawler.git
cd picrawler
sudo python3 setup.py install
This step will take a little time, so please be patient.
Finally, you need to run the script i2samp.sh to install the components required by the i2s amplifier, otherwise the
pislot will have no sound.
cd ~/picrawler
sudo bash i2samp.sh
3.1. Quick Guide on Python 31
To Next Page
Loading...
