SunFounder PiCrawler Kit
4.2 Install and Configure EzBlock Studio
As soon as the robot is assembled, you will need to carry out some basic operations.
• Install EzBlock Studio: Download and install EzBlock Studio on your device or use the web-based version.
• Connect the Product and EzBlock: Configure Wi-Fi, Bluetooth and calibrate before use.
• Open and Run Examples: View or run the related example directly.
Note: After you connect the PiCrawler, there will be a calibration step. This is because of possible deviations in
the installation process or limitations of the servos themselves, making some servo angles slightly tilted, so you can
calibrate them in this step.
But if you think the assembly is perfect and no calibration is needed, you can also skip this step.
Note: Hello, welcome to the SunFounder Raspberry Pi & Arduino & ESP32 Enthusiasts Community on Facebook!
Dive deeper into Raspberry Pi, Arduino, and ESP32 with fellow enthusiasts.
Why Join?
• Expert Support: Solve post-sale issues and technical challenges with help from our community and team.
• Learn & Share: Exchange tips and tutorials to enhance your skills.
• Exclusive Previews: Get early access to new product announcements and sneak peeks.
• Special Discounts: Enjoy exclusive discounts on our newest products.
• Festive Promotions and Giveaways: Take part in giveaways and holiday promotions.
Ready to explore and create with us? Click [] and join today!
4.3 Calibrate the PiCrawler
After you connect the PiCrawler, there will be a calibration step. This is because of possible deviations in the installation
process or limitations of the servos themselves, making some servo angles slightly tilted, so you can calibrate them in
this step.
But if you think the assembly is perfect and no calibration is needed, you can also skip this step.
Note: If you want to recalibrate the robot during use, please follow the steps below.
You can open the product detail page by clicking the connect icon in the upper left corner.
4.2. Install and Configure EzBlock Studio 87
To Next Page
Loading...
