SunFounder PiCrawler Kit
8. Configure the wireless LAN by providing your network’s SSID and Password.
Note: Set the Wireless LAN country to the two-letter ISO/IEC alpha2 code corresponding to
your location.
9. To remotely connect to your Raspberry Pi, enable SSH in the Services tab.
• For password authentication, use the username and password from the General tab.
• For public-key authentication, choose “Allow public-key authentication only”. If you have an
RSA key, it will be used. If not, click “Run SSH-keygen” to generate a new key pair.
14 Chapter 3. Play with Python
To Next Page
Loading...
