Sungrow SBR096 - Finalizing COM2 Connection; Fasten Swivel Nut; Installing COM2 Cable Connector

37
step 9 Fasten the swivel nut.
- - End
5.8.2 Installing the COM2 Cable Connector
step 1 Remove the waterproof lid from the COM2 terminal.
step 2 Insert the COM2 connector into COM2 terminal on the bottom of the combiner box until
there is an audible click.
step 3 Pull cables outwards to confirm whether they are fastened firmly.
- - End
User Manual 5 Parallel System（Optional）