78
7.3 Login
7.3.1 Requirements
The following requirements should be met:
• The AC or DC side of the inverter is powered-on.
• The mobile phone is within 5 meters away from the inverter and there are no obstructions
in between.
• The Bluetooth function of the mobile phone is enabled.
The inverter can only pair with one phone at a time through Bluetooth.
7.3.2 Login Procedure
step 1 Open the App to enter the login page, tap Local Access at the bottom of the page to go to
the next page.
step 2 Establish the Bluetooth connection by either of the two following ways. If the LED indicator
flashes blue, the connection is successfully established.
• Scan the QR code on the side of the inverter for Bluetooth connection.
• Tap "Manual connection" and select "Others" on the bottom of the page, the Bluetooth
search page will automatically pop up, and select the inverter to be connected according
to the SN on the nameplate on the side of the inverter body.
7 iSolarCloud App User Manual
To Next Page
