80
figure 7-2 Login
The Account is “user”，and the initial password is "pw1111" or "111111" which
should be changed for the consideration of account security.
To set inverter parameters related to grid protection and grid support, contact your
distributor to obtain the advanced account and corresponding password. If the dis-
tributor is unable to provide the required information, contact SUNGROW.
step 4 If the inverter is not initialized, you will enter the quick setting screen of initializing protection
parameter.
figure 7-3 Initialization Protection Parameter
The Country/Region must be set to the country where the inverter is installed at.
Otherwise, the inverter may report errors.
step 5 After finishing the settings, tap TUNR ON DEVICE at the upper right corner and the device
will be initialized. The App will send start instructions and the device will start and operate.
step 6 If the inverter is initialized, the App automatically turns to its home page.
7 iSolarCloud App User Manual
To Next Page
