Sungrow SG36CX-US - Mounting Steps

23
IItteemm
SSppeecciiffiiccaattiioonn
Level
-
Hammer drill
Drill bit: φ12
Socket wrench
Including 16mm socket
Wrench
Opening: 16mm
SSppaarree ppaarrttss
IItteemm
QQuuaannttiittyy SSppeecciiffiiccaattiioonn
SSoouurrccee
Grub screw
6 M4×10
Delivery scope
2 M6×65
Delivery scope
Bolt assembly
4 M10
Delivery scope
4.6.2 Mounting Steps
Step 1 Assemble the mounting-bracket by using the connecting bar.
Step 2 Level the assembled mounting-bracket by using the level, and mark the positions for
drilling holes on the PV bracket. Drill the holes by using a hammer drill.
Step 3 Secure the mounting-bracket with bolts.
User Manual 4 Mechanical Mounting