6 • Questions? Call or Text +1-801-658-0015
Users Guide
• Measured gap distances (between electrodes, between the tips and workpiece, etc)
• Electrode placement in electrode holders (ush with top, extending “X” amount, etc.)
• Welding Power Supply settings (energy, length, etc.)
• Make sure there are no impediments to shaft movement.
• Make sure all the screws and connectors are tight.
• Make sure the weld head is placed on a stable, level surface that does not wobble.
• Try to make sure the materials being welded are clean and free of contaminants like dirt and oil.
• Whenever possible, xture the parts being welded to ensure repeatable positioning and stability during
the weld.
• Keep electrodes clean (create a process of maintaining the electrodes after a predetermined number of
welds.
To Next Page
Loading...
