Page | 72
SUNSYNK MAX | User Manual
APPENDIX E
The Sunsynk inverter can be connected to the internet, but you need to add a data logger to
do this.
The inverter is compatible with Solar Man data-loggers, which you can obtain from us with your
distributor
1. LAN-Type Data Logger
2. Wi-Fi-Type Data Logger
3. GSM-Type Data Logger
To setup the Internet connection for the Data Logger, please refer to the App User instructions.
The Data Logger should be connected to the bottom of the inverter via the connection socket
marked WIFI.
For more information, training videos, software upgrades, help line, forum please refer to http://
www.sunsynk.com - Tech Support (Do not forget to register first on the website).
Sunsynk
@energysolutions
@sunsynkofficial
Earth-leakage protection class Type A
Earth-leakage sensitivity 30mA
Curve code C
Network type AC
Poles description 2P
Earth-leakage protection time delay Instantaneous
To Next Page
Loading...
Need help?
General