Chapter 7: BIOS
7-31
Trusted Computing (Available when a TPM device is
installed and detected by the BIOS)
Confi guration
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled,
onboard security devices will be enabled for TPM support to enhance data integrity
and network security. Please reboot the system for a change on this setting to take
effect. The options are Enabled and Disabled.
TPM State
Select Enabled to use TPM (Trusted Platform Module) settings to enhance system
data security. Please reboot your system for any change on the TPM state to take
effect. The options are Disabled and Enabled.
Pending Operation
Use this item to schedule a TPM-related operation to be performed by a security
device for system data integrity. Your system will reboot to carry out a pending TPM
operation. The options are None, Enable Take Ownership, Disable Take Owner-
ship, and TPM Clear.
Note: Your system will reboot to carry out a pending TPM operation.
Current Status Information
This item displays the status of the TPM support on this motherboard:
• TPM Enabled Status
• TPM Active Status
• TPM Owner Status
TXT Support
Select Enabled to enable TXT (Trusted Execution Technology) settings to improve
data and network security. The options are Disabled and Enabled.
Note: For more information on TPM, please refer to the TPM manual at
http://www.supermicro.com/manuals/other/TPM.pdf.
To Next Page
Loading...
Need help?
General
