6-8
SUPERSERVER 2028R-TXR User's Manual
6-5 Installing the Air Shroud
The air shroud concentrates airfl ow to maximize fan effi ciency. It does not require
screws to install.
Installing the Air Shroud
1. Confi rm that your air shroud matches your chassis model. For ordering infor-
mation, visit the Supermicro website at www.supermicro.com and click on the
Where to Buy link.
2. Place the air shroud in the chassis. It fi ts behind the two fans closest to the
power supply.
Checking the Air Flow
Checking the Air Flow
• Make sure there are no objects to obstruct airfl ow in and out of the server. In
addition, if you are using a front bezel, make sure the bezel's fi lter is replaced
periodically.
• Do not operate the server without drives or drive trays in the drive bays. Use
only recommended server parts.
• Make sure no wires or foreign objects obstruct air fl ow through the chassis.
Pull all excess cabling out of the airfl ow path or use shorter cables.
Figure 6-7. Air Shroud
To Next Page
Loading...
