7-32
SUPERSERVER 2028R-TXR User's Manual
7-4 Event Logs
Use this feature to confi gure Event Log settings.
Change SMBIOS Event Log Settings
This feature allows the user to confi gure SMBIOS Event settings.
Enabling/Disabling Options
SMBIOS Event Log
Select Enabled to enable SMBIOS (System Management BIOS) Event Logging
during system boot. The options are Enabled and Disabled.
Runtime Error Logging Support
Select Enable to support Runtime Error Logging. The options are Enable and Dis-
able. If this item is set to Enable, the following item will be available for confi guration:
Erasing Settings
Erase Event Log
Select Enabled to erase all error events in the SMBIOS (System Management BIOS)
log before an event logging is initialized at bootup. The options are No and Yes.
When Log is Full
Select Erase Immediately to immediately erase all errors in the SMBIOS event log
when the event log is full. Select Do Nothing for the system to do nothing when
the SMBIOS event log is full. The options are Do Nothing and Erase Immediately.
To Next Page
Loading...
Need help?
General
