7-4
SUPERSERVER 2028R-TXR User's Manual
7-3 Advanced Setup Confi gurations
Use the arrow keys to select Advanced Setup and press <Enter> to access the
following submenu items.
Boot Features
Quiet Boot
Use this item to select the bootup screen display between POST messages and
the OEM logo. Select Disabled to display the POST messages. Select Enabled
to display the OEM logo instead of the normal POST messages. The options are
Enabled and Disabled.
AddOn ROM Display Mode
Use this item to select the display mode for the Option ROM. Select Keep Cur-
rent to use the current AddOn ROM Display setting. Select Force BIOS to use the
Option ROM display mode set by the system BIOS. The options are Force BIOS
and Keep Current.
Bootup Num-Lock
Use this item to set the Power-on state for the Numlock key. The options are Off
and On.
Wait For 'F1' If Error
Select Enabled to force the system to wait until the 'F1' key is pressed if an error
occurs. The options are Disabled and Enabled.
To Next Page
Loading...
Need help?
General
