1-12
X10QBi-F Platform User’s Manual
Note: For the PCI-E slots to work properly, follow the instructions listed
on page 1-10.
Warning! To avoid damaging the power supply or the system, and to provide adequate
power to the components, be sure to connect the 24-pin power connector and all 8-pin
T-SGPIO 1/2 Serial_Link General Purpose I/O Headers
USB0/1, USB2/3, USB6/7 Front Panel Accessible USB Connections
USB4, USB5 Type A Front Panel USB Connectors 4/5
UID (on the I/O module) UID (Unit Identier) Switch (SWUID1/SW1)
VGA 1/2 Backpanel VGA Port
To Next Page
Loading...
