1-6
X9DRW-3F/X9DRW-iF Motherboard User’s Manual
Warning: To avoid damaging your motherboard and components, please use a
power supply that supports a 24-pin, two 8-pin power and one 4-pin connectors. Be
sure to connect the 24-pin and the 8-pin power connectors to your power supply
for adequate power delivery to your system. The 4-pin power connector is optional;
however, Supermicro recommends that this connector also be plugged in for optimal
power delivery.
T-SGPI0 1/2 Serial-Link General_Purpose IO Headers 1/2
USB 0/1, 2/3 Back Panel USB 0/1, 2/3 Ports
USB 4/5 Front Panel Accessible USB 4/5 Connections
UID Switch UID (Unit Identier) Switch
VGA1 Backpanel VGA Port 1/Front Panel VGA Port2
X9DRW-3F/X9DRW-iF LED Indicators
LED Description State Status
LED1 BMC Green: Blinking Normal
LED2 Power LED Green: On SB Power On
LED3 UID LED Blue: On Unit Identied
To Next Page
Loading...
