4-14
X10SAT User’s Manual
PCI-E Conguration
This item displays the information of the (graphics) device installed on a PCI-E
slot.
CPU SLOT6 PCI-E 3.0 X16
CPU SLOT6 PCI-E 3.0 X16 - Gen X
This feature allows the user to select PCI-E support for the device installed on
Slot6. The options are Auto, Gen1 (Generation 1), Gen 2 and Gen 3.
CPU SLOT4 PCI-E 3.0 X8(IN X16)
CPU SLOT4 PCI-E 3.0 X8(IN X16) - Gen X
This feature allows the user to select PCI-E support for the device installed on
Slot4. The options are Auto, Gen1 (Generation 1), Gen 2 and Gen 3.
CPU SLOT2 PCI-E 3.0 X4 (IN X16)
CPU SLOT2 PCI-E 3.0 X4 (IN X16) - Gen X
This feature allows the user to select PCI-E support for the device installed on
Slot4. The options are Auto, Gen1 (Generation 1), Gen 2 and Gen 3.
Detect Non-Compliant Device
Select Enabled for the AMI BIOS to automatically detect a PCI-E device that is
not compliant with the PCI-E standards. The options are Enabled and Disabled.
Program PCI-E ASPM After OpROM
PCI-E ASPM, the Active State Power Management for PCI-Express slots, is a
power management protocol used to manage power consumption of serial-link
devices installed on PCI-Exp slots during a prolonged off-peak time. If this item
is set to Enabled, PCI-E ASMP will be programmed after OpROM. If this item
is set to Disabled, the PCI-E ASPM will be programmed before OpROM. The
options are Enabled and Disabled.
CPU SLOT6 PCI-E 3.0 X16 - ASPM,
CPU SLOT4 PCI-E 3.0 X8(IN X16) - ASPM,
CPU SLOT2 PCI-E 3.0 X4 (IN X16)- ASPM
Use this feature to set the ASPM (Active State Power Management) level for
the graphics device installed on a PCI-E or PCI slot specied by the user. The
options are Disabled, ASPM L0s, ASPM L1, ASPM L0sL1, and Auto.
To Next Page
Loading...
Need help?
General
