Appendix D: Dual Boot Block
D-5
7. After the system powers on, the secondary boot block starts to initialize the
essential hardware components and locates Super.ROM in the USB ash
drive, which was mounted earlier. If Super.ROM is found, the on-duty boot
block boots to it and nishes the rest of the POST processes. The system
will automatically enter the BIOS recovery ash page in Setup at the end of
POST. Move the cursor to Proceed with ash update and press ENTER.
8. The BIOS recovery ash begins and programs the boot blocks as well as the
main block.
To Next Page
Loading...
Need help?
General
