Superwind 350 - 6. Electrical Components and Connections; 6.2 Wiring Diagram

© Copyright Mission Critical Energy Inc, 2019 Version 1-2019
www.superwind.com
15
5.5 Shipping
5.5.1 Measurements:
Superwind 350/48V
Box: 23” x 13” x 9” - 1.55 Cubic Feet
5.5.2 Weight
Superwind 350/48V
Box: 38 lbs (17.2 Kg)
Add 1 lb if optional Stainless Steel Bushing is included
5.5.3 Shipping Class and Commodity or HB Number
Shipping Class: 77.5
HS Code: 85023100
6.
Electrical Components and Connections
6.1 General information
Always use caution and follow all industry accepted practices and safety procedures when
working on your Superwind 350/48V unit or installation system. Electrical system installation,
maintenance and repairs should only be carried out by competent personnel who have studied
and are familiar with the information and instructions provided in this manual. Contact
Superwind for clarification if any questions arise.
All electrical components should be mounted at their respective locations
prior to making any electrical connections.
Ensure batteries remain disconnected until the installation is complete.
Do not connect the battery / battery bank to the system until installation
of the turbine is complete!
6.2 Wiring diagram
Figure 6.2 shows the wiring diagram for a typical Superwind 350/48V system.