B290
N= 4
Step 28 Removing the Control Panel (B010):
(a) Remove the top cover (Step 1).
(b) Remove the detergent drawer handle (Step 21).
(c) Use a cross head screwdriver to unscrew the three screws (C150) securing the detergent dispenser
to the control panel (B010).
(d) Remove the switch (B040) (Step 23).
(e) Remove the program selector knob (B022) and spin speed selector knob (B003) by gripping them
tightly and pulling (Step 24).
(f) Use a long crosshead screwdriver to remove the four screws (B290) securing the control panel.
(g) Remove the control panel, then recover all the electric components that do not need replacing.
(h) To re-assemble, follow the same procedure in reverse order.
CONTROL PANEL
DASVDFFB
VV, LBB 2