Supratec S200 - Page 32

32
User Manual S200 Open
Update April 2018
In this case, temperature or turbidity will be selected as these 2 parameters are delivered by the
sensor.
↕→
Parameter 1
Turbidity meas.
Note that these two parameters can be viewed simultaneously by configuring parameters 1 and
2.
↕→
Parameter 2
Temp. measurement
The main screen then displays:
SS
2.9
NTU
°C
140.00
°C
↓
Man→
The temperature value from the turbidity sensor is displayed after activation in the TEMP.
COMPENS. menu.
↕→
Default temp.
25.0°C
Choose sensor
Turbidity
The main screen then displays:
SS
2.9
NTU
°C
23.10
°C
↓
Man→