Supratec S200 - 8.7 Controller Parameter Settings

39
User Manual S200 Open
Update April 2018
8.6 Minimum pulse
The "Minimum pulse” setting determines the shortest pulse time for a pulse interval
controller. This is particularly important for the widest actuators, since shorter pulses
cannot be processed.
Note:
The minimum pulse time shall not exceed 25% of the pulse interval time.
Pulse interval
10s
Minimum pulse
0.5s
8.7 Controller parameter settings
Select the CONTROLLER SETTING function in the main menu.
↕→
Temperature contr.
The right arrow gives access to the setting details. The example described below represents the
temperature parameter.
Set point
↕→
0.0°C
P-range
0.0°C
Each item can be changed, right arrow then up or down, to set a numerical value.
Set point
←
1.5°↕C
P-range
0.0°C