User Manual S200 Open
Update April 2018
The adjustable “automatic stop” time indicates a override stop at the scheduled time. The
predetermined variable is then set at 0%.
8.8.2 Automatic controller mode
When the controller is in automatic mode, the current controlled variable.
8.9 Date and time
The date and time settings are available in the main menu to adjust the clock built into the device
in real time.
Each item can be changed to make the adjustment (minutes, hours, days, months, year).
8.10 Analog outputs
The S200 measurement and monitoring device enables all measurement values to be
output as standard current signals of 0/4-20mA according to standard DIN IEC 60381-1.
You can adjust the output type at this location. BASIC ADJUSTMENT has to be chosen
from the main menu and then ANALOG OUTPUT.
To Next Page
Loading...