Mechanical Stationary
Operator’s Manual
© 05/2020 300-0804
19
SETUP AND CONFIGURATION
Emergency Stop
The Supreme Stationary Feed Processor has an emergency stop located at the front of the mixer on the electrical panel.
An additional emergency stop button can be added when equipped with wireless controls.
Transporting and Lifting
If the feed processor must be lifted, always lift from the frame. NEVER lift from the tub or weighbars. When transporting
the feed processor on a truck or trailer, use the tie-down hooks which are located at the front and rear of the feed
processor. Never lift from the top of the VFD / Soft Start.
Equipment Inspection Before Startup
See
36.
Functional Checks Before Operating
See
36.
Refer to the Benshaw
manual included in the
control panel for usage of
this set of controls
Emergency Stop,
Start, Stop and Reset con-
trols for the unit and status
indicator lights
To Next Page
Loading...
Need help?
General
