Mechanical Stationary
Operator’s Manual
© 05/2020 300-0804
33
Dual Side Door
Optional side doors allow the mixer to be unloaded from the side instead of the end. With two doors, it also allows for a
quicker unloading time. These doors can be ordered to operate independently or in tandem.
Figure 28
ADDITIONAL OPTIONS
Electrical
If your Supreme Stationary Processor was supplied with an electric motor or soft start, refer to the supplied manufacturer’s
manual for operation and maintenance procedures. Service of this equipment must be completed by a certified electrician.
Electrical Scales
Supreme International Limited uses Dinamica Generale and Digi-Star products on its feed processors.
Please refer to the scale owner’s manual for operating procedures. Any troubleshooting or service related issues should
be directed to your the contacts below.
WARNING
Do not touch electrical connections before you first
ensure that power has been disconnected. Electrical
shock can cause serious or fatal injury.
Digi-Star 24/7 Tech Support
Digi-Star, LLC
W5527 Hwy 106
Fort Atkinson, WI 53538
Toll Free: 800-225-7695
Phone: 1-920-563-9700
tasupportds@topcon.com
DG - Tech Support
Contact: Mike Melso
Ph: 920-428-0156
email: mike@dinamicagenerale.com
Zeltex LLC - 24/7 Support
Ph: 301-791-1068
To Next Page
Loading...
Need help?
General
