396-3815Y1 SureFire PumpRight for Raven RCM 66 Revised 01/16/2018
PWM Valve and Motor Parts
H
Maintenance
& Parts
164-60564
Hydraulic Motor
Seal Kit for Eaton
T Series hydraulic
motor with 1" shaft
166-ORING-012
O-ring for manifold
ports between
valve and motor
Qty 2
166-NV10-22C-O-N
Needle valve for hydraulic
PWM motor
166-158-1042-001
Eaton T Series Motor,
1" Shaft, 4.9 CID,
Manifold Ports
Alternate: 166-158-
1543-001
Eaton T Series Motor,
1" Shaft, 4.0 CID,
Manifold Ports —-
The smaller 4.0 CID
motor is used where
hydraulic flow is
limited, but full
PumpRight output is
necessary, an
example is plumbed in
series behind John
Deere CCS Fan.
166-4303512
Coil, 12 Volt DC
EY Coil
166-SP10-20M-0-N-00
H/F Prop 2-W Solenoid
Valve with Manual Over-
ride (cartridge valve only,
does NOT include electri-
cal coil)
166-050308-SS
.312 (5/16) x 3 - 1/2" SS
bolts for hydraulic motor
166-05LW-SS
5/16" SS lock washer
for hydraulic motor
Qty 4 each
161-01-8MB-
8MJ
Adapter - #8
Male O-Ring
Boss x #8
Male JIC
161-07-1108R
Hydraulic
Check Valve -
#8 Male O-
Ring Boss Inlet
x #8 Male JIC
Outlet
161-02-8MJ
-8FJX-90
Elbow - #8
Female JIC
x #8 Male
JIC - 90
(optional)
164-FTA0925 4.9 CID Hydraulic Motor with PWM Valve and Bypass Valve,
CW Rotation (includes all parts below EXCEPT hydraulic
adapter fitting and elbows.)
164-FTA0994 same as above EXCEPT smaller 4.0 CID motor (This is the
standard motor beginning in 2016. It uses less oil than
the motor above.)
165-P15648-2
PWM Hydraulic Valve with
Bypass, Complete Manifold
Only for mounting to Eaton
T Series Motor
©2010-2018 SureFire Ag Systems— All Rights Reserved
To Previous Page
Loading...
