7.1
Starting and Operating
Check Before Riding
Before operating the electric motorcycle， please check
the following items to ensure that the Hyper Bee electric
motorcycle is safe to operate：
Battery pack
Check that the battery level displayed on the battery
pack or dashboard is sufficient for your planned ride.
Range is affected by your personal riding style,
environmental conditions, and riding terrain, so the
battery charge display is for reference only, we
recommend you to fully charge before your ride.
Chain
Check the chain tension and condition. Adjust or replace
if necessary. Please refer to "Chain" on page 10.9.Brake
system
Squeeze the brake levers independently and push the
motorcycle each time to ensure the front and rear
wheels can be fully locked.
Throttle
When the key switch is in the off position， twist the
throttle and release it to check whether the throttle
rotates smoothly and returns to idle freely.
Tires
Check the tire pressure and tread depth of the tires.
Check the cold tire pressure， and adjust as necessary to
maintain the recommended tire pressure range. Check
your tires for damage, abnormal wear, and tread depth.
Replace your tires immediately if the minimum tread
depth described on page 10.9 is reached.
Electrical System
Che c k w he t he r t h e h ea d li gh t, d as hbo ard an d
combination switch are functioning properly.
Key Switch
This is a two-position switch located on the right side of
the dashboard. The functions listed below：
OFF A
ON B
OFF position
This position is to turn off the Hyper Bee electric
motorcycle. The key can also be removed from this
position.
ON position
This position is to turn on the Hyper Bee electric
motorcycle. The following changes occur when switch is
rotated to this location：
Dashboard ON.
Headlight ON.
Operate Key Switch：
1. Insert the key into the key switch and turn clockwise to
switch the key from OFF position to ON position，
thereby starting the Hyper Bee electric motorcycle.
2. When the Hyper Bee electric motorcycle is started，
turn the key counterclockwise to switch the key from ON
position to OFF position.
____________WARNING____________
Incorrect tire pressure is a common cause of tire
damage and loss control, resulting in serious
personal injury. Check the tires regularly to
ensure good tire condition
Starting and Operating
7.2
To Next Page
Loading...
