10.4
10.3
Please refer to page 10.6 Torque management.
Maintenance Maintenance
Torque Management
Check regularly and tighten the following fasteners on
the Hyper Bee electric motorcycle according to the
specified torque.
_ _ _ _ _ _ _ _ _ _ _ C A U T I O N_ _ _ _ _ _ _ _ _ _ _
Steering tube nut adjustment method：
1. Place the motorcycle on a repair stand so that
the front wheels are off the ground
2. Loosen the steering tube lock bolt and the front
fork lock bolt on the upper triple clamp
3. Tighten the steering tube nut to 20N.m and
then loosen it by 1/4 turn
4. Tighten the steering tube lock bolt and the front
fork lock bolt on the upper triple clamp
5. Check whether the handlebar turns smoothly
and repeat the above operation if necessary
To Next Page
Loading...
