System Warning Message
When a fault is detected, the fault indicator A on the top
of the dashboard will light up, and the corresponding
warning code will be displayed in the B area on the
Dashboard LCD screen.
Please refer to the table starting on the next page for
possible causes and solutions.
11.210.15
11.1
Hyper Bee Electric Motorcycle Troubleshooting
All Hyper Bee electric motorcycles are carefully inspected
before delivery by your Authorized Surron Dealer. Even
though your Hyper Bee electric motorcycle has been
carefully inspected, occasional technical problems might
occur. The following information provides guidelines to
help you identify problems and do basic maintenance
should YOU determine you have the necessary skills. If
you are unable to solve the problem by yourself, please
contact your Authorized Surron Dealer for assistance.
Safety Interlock
When the battery pack is connected to the Hyper Bee
electric motorcycle, if the battery management system
detects a serious internal failure, one or both of the
following two measures will be taken to prevent battery
pack damage:
1. Riding prohibited. If the battery level is 0, or if the
battery management system detects some serious
internal faults, the motorcycle will be prohibited from
use until the problem is solved.
2. Charging prohibited. If the battery management
system detects some serious internal faults, it will
prevent charging, until the problem is solved.
Precautions for Hyper Bee Electric Motorcycle
Your Hyper Bee electric motorcycle has several high
voltage components, please take proper precautions
when using it. The high voltage components are
dangerous and can result in electric shocks, burns and
even serious personal injury.
For safety purposes, always follow the instructions on
the label attached to the motorcycle parts and do not
touch or attempt to remove or replace any high voltage
parts, cables (marked by the orange outer tube) or
connectors. In the event of an accident, do not touch any
high voltage terminals or components connected to the
cables. In case of fire in the electric motorcycle, ensure
your personal safety first and then use a Class D rated
fire extinguisher to put out the fire. When the flame is
out, use large quantities of water or a water-based fire
extinguisher to cool it down.
_______ _ _ _ _ _ CAUTION_ _ _ _ _ ______
When vehicle had issue, the warning indicator on
the dashboard stays on, and when the vehicle
speed is 0, the LCD screen will display the
corresponding error code
Troubleshooting Troubleshooting
_____________WARNING_____________
Please make sure the dust cap is well placed
during the cleaning process to avoid exposing
the magnetic connector to the air or water, to
prevent damage to the vehicle's electrical and
power systems!
_____________WARNING_____________
After cleaning and before starting to ride, make
sure the brakes system functions properly
To Next Page
Loading...