FUEL AND LUBRICATION SYSTEM 4-7
• Remove the main jet holder
1, valve seat
2 and pilot jet
3.
A Main jet
1 Main jet holder
2 Valve seat
3 Pilot jet
• Slowly turn the pilot screw
4 in clockwise and count the num-
ber of turns until the screw is lightly seated. Make a note of
how many turns were made so the screw cam be reset cor-
rectly after cleaning.
• Remove the pilot screw
5 with the spring
6, washer
7 and
O-ring
8.
• Remove the main air jet
9 and pilot air jet
0.
To Next Page
Loading...
