CHASSIS 5-37
• Remove the cushion rod nut
1 and bolt.
• Remove the cushion lever nut
2 and bolt.
INSPECTION AND DISASSEMBLY
SPACERS
• Remove the dust seal covers, washers and spacers from the
swingarm, cushion lever and cushion rod.
Inspect the spacers for any flaws or other damage. If any dam-
ages are found, replace the spacers with new ones.
SWINGARM BUSHING
• Remove the dust seals.
" 09913-50121: Oil seal remover
#
Insert the spacers into the swingarm bushings, move the spacer
up and down and check for any play. If there is excessive play,
replace the bushings with new ones.
The removed dust seals must be replaced with new
ones.
To Next Page
Loading...
