ELECTRICAL SYSTEM 6-3
USING THE MULTI CIRCUIT TESTER
• Properly use the multi circuit tester
+ and
- probes.
Improper use can cause damage to the vehicle and tester.
• If the voltage and current values are not known, begin mea-
suring in the highest range.
• When measuring the resistance, make sure no voltage is
applied. If voltage is applied, the tester will be damaged.
• After using the tester, be sure to turn the switch to the OFF
position.
"
Before using the multi circuit tester, read its instruc-
tion manual.
Multi circuit tester
To Next Page
Loading...
