5-42 CHASSIS
• Tighten the swingarm pivot nut to the specified torque.
& Swingarm pivot nut: 65 N·m (6.5 kgf-m, 47.0 lb-ft)
After installing the rear wheel, adjust the following before riding.
DRIVE CHAIN.......................................................... !2-12
TIRE......................................................................... !2-17
SUSPENSION SETTING
REAR SHOCK ABSORBER SPRING SETTING
• Turn the adjuster
1 to obtain the spring length
A of 269.4
mm (10.6 in).
• Tighten the lock ring
2 to the specified torque.
& Rear shock absorber lock ring:
45 N·m (4.5 kgf-m, 32.5 lb-ft)
SPRING SETTING TABLE
Spring preset length
A
DR-Z125
DR-Z125/L
Soft
263.7 mm (10.4 in) 261.1 mm (10.3 in)
Standard
240.5 mm (9.47 in) 241.1 mm (9.49 in)
Hard 228.3 mm (9.0 in) 234.2 mm (9.2 in)
To Next Page
Loading...
