CHASSIS 5-41
NOTE:
Press the bearing at 4.0 mm (0.16 in) depth from the cushion
lever and rod edge.
NEEDLE BEARINGS
• Apply SUZUKI SUPER GREASE “A” to the spacers and nee-
dle bearings before installing.
% 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Press the needle bearing into the cushion lever and rod by
using the special tool and suitable socket wrench.
" 09924-84521: Bearing installer
REAR SUSPENSION
• Tighten the cushion lever and rod nuts to the specified torque.
& Cushion lever nut (CTR): 80 N·m (8.0 kgf-m, 58.0 lb-ft)
Cushion rod nut: 80 N·m (8.0 kgf-m, 58.0 lb-ft)
• Tighten the rear shock absorber lower mounting bolt to the
specified torque.
& Rear shock absorber lower bolt:
60 N·m (6.0 kgf-m, 43.5 lb-ft)
• Tighten the rear shock absorber upper mounting bolt to the
specified torque.
& Rear shock absorber upper bolt:
60 N·m (6.0 kgf-m, 43.5 lb-ft)
To Next Page
Loading...
