Suzuki DR-Z125L - Rear Wheel and Rear Brake; Removal

CHASSIS 5-31
REAR WHEEL AND REAR BRAKE
REMOVAL
• Remove the rear brake adjusting nut
1.
• Loosen the chain adjuster nuts
2 (right and left).
• Remove the cotter pin
3 and the rear axle nut 4.
• Raise the rear wheel off the ground with a jack or wooden
block.
• Remove the rear axle
5.
• Disengage the drive chain from the rear sprocket.
• Remove the rear wheel together with the rear brake panel.
1 Rear axle
2 Dust seal
3 Rear sprocket
4 Bearing
5 Spacer
6 Bearing
7 Brake shoe
8 Brake camshaft
9 Brake panel
0 Brake cam lever
A Rear sprocket mounting bolt
B Rear axle nut
C Rear brake cam lever nut
ITEM N·m kgf
.
m lb-ft
A 27 2.7 19.5
B 45 4.5 32.5
C 11 1.1 8.0
@