2-20 PERIODIC MAINTENANCE
CHASSIS BOLTS AND NUTS
Check that all chassis bolts and nuts are tightened to their specified torque. (Refer to page 2-21 for the loca-
tions of the following bolts and nuts on the motorcycle.)
Tighten initially at 1 month and every 6 months thereafter.
Item N·m kgf-m lb-ft
1 Steering stem head nut 90 9.0 65.0
2 Front fork upper clamp bolt 23 2.3 16.5
3 Front fork lower clamp bolt 33 3.3 24.0
4 Front axle nut (DR-Z125) 35 3.5 25.5
(DR-Z125L) 44 4.4 32.0
5 Handlebar clamp bolt 23 2.3 16.5
6 Front brake master cylinder mounting bolt
(DR-Z125L)
10 1.0 7.0
7 Front brake caliper mounting bolt (DR-Z125L) 23 2.3 16.5
8 Brake hose union bolt (DR-Z125L) 23 2.3 16.5
9 Air bleeder valve (DR-Z125L) 7.5 0.75 5.5
0 Brake disc mounting nut (DR-Z125L) 8.5 0.85 6.0
A Front footrest bolt 55 5.5 40.0
B Brake pedal boss nut/bolt 29 2.9 21.0
C Swingarm pivot nut 65 6.5 47.0
D Rear shock absorber mounting bolt/nut
(Upper & Lower)
60 6.0 43.5
E Cushion lever bolt (Front) 55 5.5 40.0
F Cushion lever nut (Center) 80 8.0 58.0
G Cushion rod nut 80 8.0 58.0
H Brake cam lever nut 11 1.1 8.0
I Rear axle nut 45 4.5 32.5
To Next Page
Loading...
