5-16 CHASSIS
MASTER CYLINDER REMOVAL AND DISAS-
SEMBLY
• Remove the brake lever cover
1.
• Place a rag underneath the brake hose union bolt
2 on the
master cylinder to catch any spilt brake fluid. Loosen the
brake hose union bolt and disconnect the brake hose.
#
• Remove the master cylinder assembly
3.
• Remove the brake lever
4.
NOTE:
Do not loosen the brake lever spring
5.
• Remove the reservoir cap
6 and diaphragm
7.
• Drain the brake fluid.
Immediately wipe off any brake fluid contacting any
part of the motorcycle. The brake fluid reacts chemi-
cally with paint, plastics, rubber materials, etc., and
will damage them severely.
To Next Page
Loading...
